The Honeywell Home T9 Smart Thermostat (RCHT9610WFW2004) is a Wi-Fi enabled thermostat designed to provide intelligent control over heating and cooling systems, offering enhanced comfort, energy savings, and remote management capabilities. It requires a C-Wire (common wire) for 24 VAC power; if a C-Wire is not present, a C-Wire Adapter is included in the box.
Function Description:
The T9 Smart Thermostat allows users to control their home's temperature from anywhere using a tablet or smartphone. It features a "Priority" function, which, when used with optional Wireless Room Sensors, can create an average temperature based on specific rooms, prioritizing comfort where it's most desired. This includes detecting motion to automatically select active rooms for temperature averaging. The thermostat also incorporates geofencing to save energy when residents are away and provides customizable alerts for mobile devices, such as warnings for freezing pipes or excessively hot rooms. Its simple installation process means the thermostat programs itself after answering a few basic questions.
Important Technical Specifications:
- Model: RCHT9610WFW2004
- Power Requirement: 24 VAC (C-Wire required; C-Wire Adapter included if not present)
- Input: 24V~@60Hz, 0.2A
- Compatibility: Compatible with most heating, cooling, and heat pump systems.
- Incompatibility: Does not work with electric baseboard heat (120-240V) or millivolt systems. It also does not support S terminals for indoor and outdoor sensors.
- Wireless Room Sensor (Optional Accessory):
- Range: Up to 200 feet (can vary based on home construction, wireless interference, and other factors).
- Capacity: Can connect up to 20 sensors.
- Sensor Capabilities: Temperature, humidity, and occupancy detection.
- Control: Android or iOS smartphone, tablet, or device.
- U1/U2 Terminals: The T9 Smart Thermostat cannot control equipment wired to U1 or U2 terminals.
Usage Features:
- Remote Control: Adjust the thermostat from anywhere using a mobile device.
- Prioritize Rooms: With optional Wireless Room Sensors, users can select specific rooms or multiple rooms to prioritize for comfort, or allow the system to follow their movement using built-in motion detection. This creates an average temperature based on the selected or active rooms.
- Geofencing: Automatically saves energy by adjusting temperature settings when residents are away from home.
- Customizable Alerts: Receive notifications on a mobile device for critical events, such as dangerously low temperatures that could burst pipes or high temperatures in specific rooms.
- Simple Installation: The thermostat self-programs after a few initial setup questions.
- Whole-Home Range (with optional sensors): Extend the thermostat's reach throughout the home, connecting up to 20 sensors for comprehensive temperature, humidity, and occupancy detection.
- Display Information:
- Indoor Temperature: Shows the current indoor temperature.
- Current Priority: Indicates the type of priority (e.g., selected rooms, active rooms) and the number of rooms being prioritized.
- Indoor Humidity: Displays the current indoor humidity.
- Desired Temperature: Shows the set temperature.
- Thermostat Menu: Access features such as mode, fan settings, schedule, priority settings, and other thermostat configurations.
- Temperature Adjustment: Use up and down arrows on the thermostat to set the desired temperature.
Maintenance Features:
- Troubleshooting Guide: The manual provides a comprehensive troubleshooting section for common issues such as a blank display, unresponsive heating/cooling systems, or inability to change temperature settings.
- Blank Display: Check circuit breaker, power switch for heating/cooling system, furnace door closure, and C-wire connection.
- System Not Responding: Verify system mode (Heat/Cool), desired temperature settings, circuit breaker, power switch, furnace door, and allow 5 minutes for the system to respond.
- Temperature Settings Not Changing: Ensure desired temperature is within acceptable ranges (Heat: 40°F to 90°F / 4.5°C to 32.0°C; Cool: 50°F to 99°F / 10.0°C to 37.0°C).
- Aux Heat in Cooling/Cooling with Heat Call (Heat Pump Systems): Verify no wire is attached to the W terminal on the UWP.
- Support Resources:
- Online Guides and Support Videos: Available at honeywellhome.com/support.
- Social Media: Twitter: @Honeywell_Home, Facebook: Honeywell Home.
- Email Support: honeywellhomessupport@honeywell.com.
- Phone Support: 1-800-633-3991.
- Mercury Notice: If replacing an old control containing mercury in a sealed tube, do not discard it in regular trash. Contact local waste management authorities for proper recycling and disposal instructions.
- Disposal Information: The product should not be disposed of with other household waste. Users should check for the nearest authorized collection centers or recyclers to ensure proper disposal and prevent negative environmental and health consequences.
- 2-Year Limited Warranty: Resideo warrants the product to be free from defects in workmanship or materials under normal use and service for two years from the date of first purchase. Defective products will be repaired or replaced at Resideo's option. The warranty does not cover removal or reinstallation costs or damage caused while the product was in the consumer's possession.
Need help?
General
To Next Page