Honeywell Round User Manual

6
4 Connect all wires
Push each wire into its corresponding
terminal until it is firmly in place.
Gently tug on wires to verify they are
secure. If you misplace a wire, use a
ballpoint pen to push down on the
terminals and release the wire.
Refer to page 8 for wiring options,
configurations, and notes.
Note: The illustration to the right
shows the most common wiring
configuration.
5 Mount the wall plate using
the provided screws
AAA
AAA

Honeywell Round Specifications

General

Temperature Control	Manual
Programmable	No
Wi-Fi Enabled	No
Color	White
Type	Non-programmable
Compatibility	Single-stage heating and cooling systems
Mounting	Wall