Honeywell SRX User Manual

manually as it will, by default, clear a pairing when powered off or when placed
into the charger.
NOTE
The SRX2 and SRX3 headset always powers up in pairing mode.
Recommended for:
l VoiceClient users sharing headsets
l Anyone using SRX2/SRX2 headsets
Why?
When sharing headsets, autopairing makes it easy to locate any device and
headset, power the two on in close proximity to one another (less than 3 feet),
and have the two pair automatically. It eliminates the need to clear pairings
manually or through VoiceConsole as it will clear a pairing when powered off or
when placed into the charger by default. When you start up the device, it will be
unpaired and will begin searching for a headset. .
Manual pairing
The user determines when to pair a device and headset by pressing buttons on
the device.
NOTE
The SRX2 or SRX3 headset can perform either manual or auto pairing for
its first pairing.
Recommended for:
l VoiceCatalyst users on A500 devices
l VoiceClient users not sharing headsets
l Anyone using SRX3 headsets
Why?
VoiceClient users that are not sharing their headsets with other users are
encouraged to use manual pairing. Manual pairing is the safest way to avoid
cross pairing, as the user is performing the pairing procedure away from other
users. Also, once a manual pairing is made (assuming no other configuration
parameters have been changed), the pairing will persist and that device and
headset will stay paired until the pairing is explicitly cleared.
VoiceConsole pairing
The user pairs a specific device to a headset via the VoiceConsole interface.
SRX3 User Guide - Preliminary 38

Honeywell SRX Specifications

General

Brand	Honeywell
Model	SRX
Category	Headsets
Language	English