EasyManua.ls Logo

Honeywell SYNC WIRELESS IMPACT User Manual

Honeywell SYNC WIRELESS IMPACT
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SYNC™ WIRELESS IMPACT™ QUICK START GUIDE
*C4
*C2
*C7
*C1
*C5
*C3
*C8
*C6
GENERAL
Turn headset ON/OFF Hold *C1
2 seconds
Adjust hear-through Volume Turn *C6 dial
Adjust Master Volume Turn *C5 dial (Bluetooth & side-tone)
PAIR WITH BLUETOOTH DEVICE
From Off state, hold *C1
for 5 seconds
LED *C7:
ON
OFF
ON ONOFF OFF
Enable Bluetooth on your device and search for new units.
Select [Sync WL xxx] and type pairing code [0000] if required
Successful pairing
LED *C7:
ON
CALL MANAGEMENT AUDIO PLAYBACK
Answer call /
End call
Press *C2
Play audio /
Pause audio
Press *C2
Initiate voice
dialling
Hold *C2
2 seconds
Beginning of
current track
Press *C4
Reject incoming
call
Press *C4 Next track Press *C3
Mute/UnMute
microphone
Press *C3
BLUETOOTH
MANUAL PAIRING
From Off state,
hold *C1 for
5 seconds
ON/OFF
Hold for
2 seconds
Question and Answer IconNeed help?

Do you have a question about the Honeywell SYNC WIRELESS IMPACT and is the answer not in the manual?

Honeywell SYNC WIRELESS IMPACT Specifications

General IconGeneral
Wireless TechnologyBluetooth
Noise Reduction Rating (NRR)25 dB
CompatibilityBluetooth-enabled devices
MicrophoneYes
TypeOver-ear
FeaturesVolume control
Noise CancellationYes
ChargingUSB

Summary

General Headset Operations

Powering On and Off

Instructions for turning the headset on and off by holding a specific button for a set duration.

Volume Adjustment

Guidance on adjusting hear-through and master volume levels using the headset's dial control.

Bluetooth Pairing Procedure

Initiate Manual Pairing

Steps to enter manual pairing mode from an off state to connect with a Bluetooth device.

Bluetooth Connection Confirmation

Information on enabling Bluetooth on your device, searching for units, and pairing code requirements.

Call Management Functions

Answering and Ending Calls

How to answer or end an active call by pressing a designated button.

Voice Dialing Activation

Instructions for initiating voice dialing on the connected mobile device.

Rejecting Incoming Calls

Procedure for rejecting an incoming call without answering it.

Microphone Mute Control

How to mute or unmute the microphone during a call.

Audio Playback Controls

Playback and Pause

Instructions for playing and pausing audio on the connected device.

Track Navigation

How to navigate to the beginning of the current track or the next track.

Related product manuals