FocusPRO
®
TH5000 Series
3 69-1923EFS—01
ENGLISH
This thermostat is ready to go!
Your new thermostat is pre-programmed by the installer and ready to use. Just check
the settings below and change if needed:
1. Fan (Auto/On): Preset to Auto .........................................To change, see page 6.
Auto is the most commonly used setting, but you may
prefer On for improved air circulation.
2. System (Heat/Cool/Auto/Em. Heat): Preset to Heat ...To change, see page 7.
You can select heating or cooling, or set the system
to control both systems automatically, if needed.
To Next Page
Loading...
Need help?
General
