164007-0001 Rev C 1/13 © 2011-2013 Honeywell International Inc. All Rights Reserved. Page 1
Thor VM1 Field Replaceable Front Panel
The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touchscreen and optional
defroster. Should any of these components fail, the front panel assembly can easily be replaced to minimize downtime. The replacement
front panel is available in several configurations.
Requirements - User Supplied
• Torquing tool capable of measuring inch pounds
• #2 Phillips screwdriver bit
Replacing Front Panel
1. If the Thor VM1 has a Windows CE operating system, place the Thor VM1 in Suspend by pressing the Power button on the front of
the Thor VM1. If the Thor VM1 has a Windows Embedded Standard operating system, select Shut Down from the Windows Shut
Down menu.
2. Remove the Thor VM1 from the Quick Mount Smart Dock by pulling
down on the red quick release handle, lifting the bottom of the Thor VM1
away from the dock, and lifting the Thor VM1 up and away from the
dock.
3. Place the Thor VM1 face down on a clean, well lit stable surface.
4. Use a #2 Phillips bit to loosen the captive M3 screws
on the tethered access panel with the SIM label.
To Next Page
Need help?
General
