EasyManua.ls Logo

Honeywell KMH 880 User Manual

Honeywell KMH 880
342 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SYSTEM INSTALLATION
MANUAL
KMH 880/KTA 870
MULTI-HAZARD AWARENESS
TRAFFIC ADVISORY SYSTEM
MANUAL NUMBER 006-10609-0003
REVISION 3 AUGUST, 2002

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Honeywell KMH 880 and is the answer not in the manual?

Honeywell KMH 880 Specifications

General IconGeneral
BrandHoneywell
ModelKMH 880
CategoryAutomobile Accessories
LanguageEnglish

Summary

Section I: General Information

Section II: Installation

2.2 Equipment Installation

Provides information on system installation, including location.

2.2.3 Processor Installation

Details processor installation considerations.

2.2.4 Configuration Module Installation

Details the installation process for the configuration module.

2.2.5 Directional Antenna Installation

Details the installation of directional antennas.

2.2.6 GPS Antenna Installation

Details the installation of the GPS antenna.

Section III: System Planning

3.1.1 Power Inputs

Details power requirements for the processor.

Section IV: Post Installation Configuration and Check Out

4.1 Post Configuration Test

Verifies system operation and provides procedures for ground checks.

4.2 Configuration Procedure

Details configuration options for the Configuration Module.

4.2.3 EGPWS Configuration Instructions

Details configuration checklist and options for EGPWS.

4.2.4 TAS Configuration Options

Details TAS configuration options.

4.3 Ground Test Procedures

Outlines procedures for ground testing the system.

4.3.2 EGPWS Ground Test Procedures

Provides ground test procedures for the EGPWS.

4.3.3 (TAS) Ground Test Procedure

Details ground test procedures for the TAS system.

Section V: Certification

5.1 Certification Procedure

Details the steps for obtaining certification.

Appendix D: Diagnostic Appendix

TASDIAG-TAS Processor Field Diagnostic Program User Instructions

User instructions for the TASDIAG diagnostic program.

3. Installing the TAS Diag Program

Provides step-by-step instructions for installing the TAS Diag program.

4. Starting TAS Diag

Explains how to start and use the TAS Diag program.

7. Configuration Module Options

Lists options for managing configuration module data.

12. Ramp Tester Mode

Enables IFR 201B ramp tester for TAS unit replies.

14. KTA Fault Codes

Lists KTA fault codes for display and I/O issues.

Appendix E: TSO Appendix

RTCA DO-160D Environmental Qualification Form

Details environmental tests conducted per RTCA DO-160D.

Appendix F: Airplane Flight Manual Supplement

KTA 870 Supplement

KMH 880 Supplement

Related product manuals