VisionPRO® TH8DDD
Series
Your new thermostat is pre-programmed and ready
to
go.
Just
set the time and day.
Then
check
the settings below and change
if
needed:
1.
Set
clock
........................................................................................................See page 6
2.
Select
fan
setting:
Preset
to
Auto .............................................................. See page 7
3.
Select
system
setting:
Preset
to
Heat ......................................................See page 8
4.
Program
schedules:
Preset
to
energy-saving levels
while you're at
work
or
asleep (assumes you
wake at 6 am, leave at 8 am, return
at
6 pm
and
go
to
bed
at
10 pm) .......................................................................See pages 10-13
A ONE-TOUCH
TEMP
CONTROL: You can override
the
program schedule
at
any time,
U and manually
adjust
the
temperature (see pages 12-14).
3
To Next Page
Loading...
