VisionPRO
®
TH8000 Series
19
69-2400EFS—03
ENGLISH
Dehumidification control
Press MORE until the dehumidifier screen is displayed,
then press s or t to set the desired humidity level and
operation (Auto or Off).
If installed to control a dehumidifier, the ther-
mostat can activate it as needed to reduce
humidity.
If you don’t have a dehumidifier, the thermostat
activates the air conditioner to reduce humidity
(may cool as much as 3°F lower than your tem-
perature setting).
Press DONE to save and exit, or press CANCEL to exit
without saving changes.
Note: Dehumidification control not available on all
models.
Press to select
Auto or Off
Press to save & exit
DONE CANCEL
DEHUMIDIFIER
Inside
AUTO
73
55
MCR29721
Press to set
desired humidity
To Next Page
Loading...
