VisionPRO
®
TH8000 Series
3
About your new thermostat
69-2400EFS—03
ENGLISH
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock ........................................................................................................................ See page 6
2. Select fan setting: Preset to Auto ............................................................................. See page 7
3. Select system setting: Preset to Heat .................................................................... See page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) .......................................................................................... See pages 10-13
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 12-14).
This thermostat is ready to go!
To Next Page
Loading...
