Need help?Do you have a question about the Honeywell Youjie HH660 and is the answer not in the manual?
General| Type | Handheld |
|---|---|
| Scanning Technology | Laser |
| Scan Pattern | Single line |
| Scan Speed | 100 scans per second |
| Decode Capability | 1D barcodes |
| Drop Resistance | 1.5 m |
| Resolution | 0.1 mm |
| Interface | USB, RS232 |
| Humidity | 5% to 95% (non-condensing) |
| Power Supply | 5V DC |
| Storage Temperature | -40°C to 60°C (-40°F to 140°F) |
Provides resources for troubleshooting and support portal access.
Information on obtaining warranty or non-warranty service.
Instructions for connecting the scanner via USB interface.
Instructions for connecting the scanner as a keyboard wedge.
Instructions for connecting the scanner via RS232 serial port.
Instructions for connecting the scanner via RS485 interface.
Procedure for creating and saving custom scanner default settings.
Using bar codes for instant scanner setup on common interfaces.
How to connect the scanner as a keyboard wedge for PC compatibility.
Connecting the scanner to laptops for parallel operation with the keyboard.
Steps for connecting the scanner via an RS232 serial port.
Connecting the scanner for an IBM POS terminal interface.
Programming the scanner for IBM SurePos USB interfaces.
Configuring the scanner for USB PC or Macintosh keyboard emulation.
Programming the scanner for USB HID bar code scanners.
Emulating an RS232 COM port using the USB interface.
Setting the scanner for Verifone Ruby terminal compatibility.
Setting the scanner for Gilbarco terminal compatibility.
Configuring the scanner for Honeywell bioptic scanner auxiliary port.
Configuring scanner for Datalogic Magellan bioptic port.
Configuring scanner for NCR bioptic scanner auxiliary port.
Setting the scanner for Wincor Nixdorf terminal compatibility.
Setting scanner for Wincor Nixdorf Beetle terminal compatibility.
Configuring scanner for Wincor Nixdorf RS232 Mode A terminal.
Setting the data transmission rate for RS232 communication.
Configuring serial data format parameters.
Settings for communication between Honeywell and bioptic scanners.
Improving readability of damaged or poor quality 1D bar codes.
Enhancing readability of damaged or poor quality PDF codes.
Step-by-step guide to adding prefixes or suffixes to bar codes.
Steps for creating and saving new data formats.
Commands used within the data format editor.
Enabling or disabling all allowable symbologies for scanning.
Settings for Codabar bar code symbology.
Settings for Code 39 bar code symbology.
Settings for Interleaved 2 of 5 bar code symbology.
Settings for NEC 2 of 5 bar code symbology.
Settings for Code 93 bar code symbology.
Settings for Straight 2 of 5 Industrial symbology.
Settings for Straight 2 of 5 IATA symbology.
Settings for Matrix 2 of 5 bar code symbology.
Settings for Code 11 bar code symbology.
Settings for Code 128 bar code symbology.
Settings for GS1-128 bar code symbology.
Settings for UPC-A bar code symbology.
Settings for UPC-E0 bar code symbology.
Settings for UPC-E1 bar code symbology.
Settings for EAN/JAN-13 bar code symbology.
Settings for EAN/JAN-8 bar code symbology.
Settings for MSI bar code symbology.
Settings for GS1 DataBar Omnidirectional symbology.
Settings for GS1 DataBar Limited symbology.
Settings for GS1 DataBar Expanded symbology.
Settings for Codablock A bar code symbology.
Settings for Codablock F bar code symbology.
Settings for PDF417 bar code symbology.
Settings for MicroPDF417 bar code symbology.
Settings for QR Code symbology.
Restoring scanner to original factory default settings.
Restoring custom defaults using serial commands.
Detailed technical specifications for the scanner.
Guide to diagnosing and resolving scanner operational issues.
To Next Page
