(i) Check to see if the power supply is experiencing AC
ripple, if so a filter may be required.
(ii) Determine if the monitor is faulty.
(iii) Determine if other peripheral equipment is causing
ripple and if so make the necessary adjustments.
c. The picture appears smeared
(i) The power supply voltage level may be unstable,
therefore, try another power supply.
(ii) Ensure the cables are correctly connected and/or
the cables are of the correct impedance.
d. The picture background continuously changes
color
(i) A fluorescent lamp's magnetic field may cause color
roll, therefore, reduce the number of fluorescent
lamps or increase the distance between the camera
and the lamps.
Camera Dimensions (mm)
To Next Page
Loading...
Need help?
General