FAQ
Introduction to Wi-Fi+
Applicable products: HONOR 10 lite
Wi-Fi+ intelligently connects to Wi-Fi networks to save mobile data consumption. When your
device detects a known or free Wi-Fi network, it will automatically turn on Wi-Fi and connect to
the network. Your device will also automatically select the optimal network in the area for the
best Internet connection.
Once you have enabled Wi-Fi+, your device will:
Automatically select and connect to the optimal network: Automatically select and
connect to Wi-Fi networks you"ve previously connected to, free networks, or your
mobile data network, depending on the signal strength at your current location.
You can view the connection status by checking the icons in the status bar:
o The icon indicates that your Phone is connected to the Internet over Wi-Fi.
o The icon in the bottom left of the signal bar indicates that your Phone is
connected to the Internet over mobile data.
Automatically turn Wi-Fi on: Depending on the Wi-Fi networks you have connected to
previously, Wi-Fi will be automatically enabled in specific locations. This will prevent
your device from constantly searching for new networks.
Assess the quality of available networks: Evaluate currently available network hotspots
and prevent your device from automatically connecting to networks with no Internet
connection.
Connecting to the Internet
Connect to Wi-Fi networks effortlessly with your device.
Connecting to a Wi-Fi network
1. Swipe down from the status bar to open the notification panel.
2. Touch and hold to open the Wi-Fi settings screen.
3. Switch on Wi-Fi. Your device will list all available Wi-Fi networks at your location.
4. Select the Wi-Fi network you want to connect to. If you select an encrypted network, you
will also need to enter the Wi-Fi password.
To Next Page
Need help?
General
Weight and Dimensions
