Batte
Power Management
On the Batte screen, you can check the estimated time remaining, and enable a
power saving mode to extend the life of your phone.
Enable Power Saving Mode
If Power Saving mode is enabled on your device and the level is higher than 10%,
some functions will be disabled, background apps will be restricted, and visual will
be weakened to reduce power consumption. When the level is lower than or equal
to 10%, stricter power saving measures are taken to ensure the longest standby time. It is
recommended that you enable Power Saving mode when the level is lower than or
equal to 20%.
To do so, go to Settings > Batte (or System Manager > Batte), and enable Power
Saving mode . A
icon will then be displayed in the status bar.
You can touch Learn more to view details about power saving measures.
Enable Peormance Mode
Peormance mode adjusts the power settings of your phone to deliver maximum
will cause the to drain more quickly, especially when graphic-
intensive apps are used.
When the has power, go to Settings > Batte (or System Manager >
Batte) and enable Peormance mode.
A icon will then be displayed in the status bar.
Peormance mode is available on selected devices only. If the Peormance mode option is
not displayed in Batte , it indicates that your device does not the feature.
Enable Sma Charge
Charge learns from your charging habits and manages the charging process
intelligently. feature reduces the wear level and prolongs the life by
reducing the time your device spends fully charged. It is advised that you keep this feature
enabled.
For example, if you are used to charging your devices overnight or for an extended period
of time, Charge will pause the charging when the capacity reaches a
level. Before you get up in the morning, Charge will resume charging until your
device is fully charged. reduces the time your device spends fully charged to slow
down wear and prolong the life.
Settings
95
To Next Page
Loading...
