1 Pair the sending and recipient devices via Bluetooth.
2 On the sending device, touch and hold a select the you want to share, touch
, and select Bluetooth.
Operations may if you are sharing from apps directly.
3 Touch the Bluetooth name of the recipient device to sharing.
4 On the recipient device, accept the Bluetooth transfer request.
Unpair a Bluetooth Device
1 On the Bluetooth settings screen, enable the Bluetooth switch.
2 In the list of Paired devices, touch next to the name of the device you wish to
unpair, then touch Unpair.
Mobile Network
Connect to Mobile Data
1
Make sure that mobile data is available on your SIM card.
2
Connect to mobile data using either of the following methods:
• Swipe down from the top right of the screen to open the Control Center. Turn on
Mobile data.
• Go to Settings > Mobile network > Mobile data, and enable Mobile data.
To save power and mobile data, disable the mobile data when you don't
need it.
Enable 5G
• 5G are only available in some countries and regions.
• Not all devices 5G.
Fifth generation mobile networks, generation wireless systems, or
(5G) is the generation mobile communication technology. Compared to 4G, 5G
higher data transfer rates and latency.
When two SIM cards are dual card 5G by default.
1 Please if your card 5G based on the carrier network and related
deployment, and contact your network carrier to enable 5G.
2 If two SIM cards are to your phone, go to Settings > Mobile network > SIM
management and set SIM 1 or SIM 2 as the default card for data.
5G features may not be available in some network environments and geographic locations
due to carrier network band
Settings
57
To Next Page
Loading...
