3
38421
LAVAOGGETTI
UTENSIL and POT WASHER
LAVE-BATTERIE
GERÅTESPÜLMASCHINEN
LAVAUTENSILIOS
HD 40 BT
HD 40 ALTA BT
HD 60 BT
HD 80 BT
HD 130 BT
Le gure relative alle istruzioni sono riportate sulle ultime pagine.
The illustrations concerning these instructions are on the inside of the back cover
Les gures concernant les notices d'utilisation sont groupées sur les dernières pages.
Die Bilder zur Gebrauchsanweisung sind auf den letzten Seiten des Umschlages.
Las guras correspondientes a las instrucciones se encuentran en las ùltimas paginas.
LB 56 BT
LB 56 ALTA BT
LB 67 BT
LB 83 BT
LB 134 BT
ITA
AVVERTENZA
Prima di procedere all'installazione, alla messa in funzione, alla regolazione e alle operazioni di manutenzione della lavaoggetti
Mod. HD/LB, leggere attentamente il presente manuale.
In caso di guasto o cattivo funzionamento della macchina rivolgersi esclusivamente ad un centro tecnico autorizzato o diretta-
mente alla ditta.
GBR
IMPORTANT
Become thoroughly familiar with the contents of thi manual before installing, setting up, adjusting and servicing utensil and pot
washer Mod. HD/LB .
Only contact an authorized technical center in the event of breakdowns or faulty machine operation.
FRA
IMPORTANT
Lisez attentivement cette notice avant la mise en place, la mise en service, le réglage et les opérations d’entretien de la machine
lave-batterie Mod. HD/LB.
En cas de panne franche ou de dysfonctionnement de la machine, adressez-vous exclusivement à un service technique agréé
ou directement à la société.
DEU
HINWEIS
Bevor man den Geschirrspüler Mod. HD/LB installiert, in Betrieb nimmt, einstellt oder Wartungsarbeiten daran vornimmt, ist
dieses Handbuch aufmerksam durchzulesen.
Bei Störungen oder Fehlbetrieb der Gerätespülmaschinen wenden Sie sich bitte ausschließlich an einen autorisierte Service-
stelle oder direkt.
SPA
ATENCION
Antes de realizar la instalación, la puesta en marcha, los ajustes y las operaciones de mantenimiento de la máquina lavauten-
silios Mod. HD/LB, lea atentamente este manual.
En caso de avería o de mal funcionamiento se dirija exclusivamente a un centro técnico autorizado o directamente a la empresa.
RCC + HP2/3