Hoover Concept one Owner's Manual

Turn the plastic ring as shown to
lock the tool in place. To remove
tools, reverse the procedure.
For additional length, attach wand
to the hose using the same proce-
dure as for attaching tools
Tools attach to the wand in the
same manner.
D. Adjust switch and
handle position
Plug cleaner into electrical outlet.
Place handle in the upright posi-
tion, and slide ON-OFF switch to
the ON position or to the HIGH
position on some models.
To clean attachments
To clean the hose wipe off dirt
with a cloth dampened with a liq-
uid detergent. Rinse with a damp
cloth. Cleaning tools may be
washed in warm water with a de-
tergent. Rinse and let dry before
using.
Maintenance
The following sections are concerned with proper maintenance of the
cleaner. Familiarize yourself with these home maintenance tasks and
keep this owner's manual in a convenient place where you can refer to it
when needed. Proper use and care of your cleaner will assure continued
cleaning effectiveness.
11

Hoover Concept one Specifications

General

Brand	Hoover
Model	Concept one
Category	Vacuum Cleaner
Language	English