Hoover F5505 - Steam Vac Spot Convertible User Manual (English)

Questions and Answers:

R
Robert ParsonsJul 30, 2025
Why is suction low during floor cleaning with my Hoover F5505 - Steam Vac Spot Convertible Vacuum Cleaner?
- C
  Christine FryJul 30, 2025
  Several factors could cause low suction during floor cleaning. The recovery tank might be full, triggering the automatic shut-off, so you should empty the recovery tank. Also, ensure the recovery tank and lid are correctly installed and securely latched. Check that the hose or tool wand is securely positioned in the floor nozzle, and inspect the lint filter for any accumulated debris.
G
gregorycamachoAug 9, 2025
Why Hoover Vacuum Cleaner has low suction in hose during tool use?
- T
  tylerdunlapAug 9, 2025
  Low suction in the hose during tool use can occur for several reasons. First, ensure the tool is securely attached to the tool connector and that the handle is in the upright, storage position. Also, the recovery tank might be full, activating the automatic shut-off, so empty it. Additionally, verify that the recovery tank and lid are properly installed and securely latched, and check the lint filter for any debris.
C
Christina CortezAug 19, 2025
What to do if my Hoover Vacuum Cleaner brushes won’t rotate?
- T
  Teresa ClaytonAug 19, 2025
  If the brushes on your Hoover Vacuum Cleaner aren't rotating, first check that the handle is fully in the operating position, as the brushes only work when the handle is in the upright, floor cleaning position. If that doesn't solve the problem, the circuit breaker may have tripped. Turn the unit off, unplug it, and check for any obstructions in the agitator brush roll. After waiting one minute, turn the carpet cleaner back on and continue cleaning.