To Next PageTo Next PageWhy won't my Hoover FH40150 Vacuum Cleaner turn on?
If your Hoover Vacuum Cleaner isn't turning on, there are several potential reasons. First, ensure the power cord is firmly plugged into the outlet. Second, check your home's fuse or breaker. Third, replace the fuse or reset the breaker if it's blown or tripped. Finally, make sure the power switch is turned on.
What to do if my Hoover FH40150 has low suction?
If your Hoover Vacuum Cleaner has low suction or isn't picking up properly, consider these possibilities: * The Dirty Water Tank might be full, engaging the automatic shut-off. Empty the Dirty Water Tank. * The tanks may not be correctly in place. Ensure all tanks are locked in place. * The Dirty Water Tank lid might not be properly positioned. Make sure the lid is correctly placed. * The nozzle might not be correctly replaced. Ensure the Nozzle is properly replaced and locked.
How to fix Hoover Vacuum Cleaner brushes that won't rotate?
If the brushes on your Hoover Vacuum Cleaner won't rotate, there are a few things to check: * First, check the fuse or breaker in your home. * Second, switch the mode selector to Wash Mode to allow the brushes to rotate. * Third, push the ON/OFF switch to turn the cleaner OFF and unplug it. Wait one minute, then plug it back in and turn it ON again. If the brushes still don't rotate and the breaker trips again, clean the brushes to remove any debris.
Why is my Hoover FH40150 not dispensing cleaning solution?
If your Hoover Vacuum Cleaner isn't dispensing cleaning solution, it could be due to a couple of reasons. Check that the tanks are locked in place. Also, the Clean Water Solution Tank may be empty, so refill it.
What to do if Hoover FH40150 Vacuum Cleaner leaves water puddles?
If your Hoover Vacuum Cleaner is leaving water puddles behind, it could be due to: * The Clean Water Solution Tank not being properly installed. Make sure it is correctly installed. * The dirty water tank being full. Empty the dirty water tank.
General| Brand | Hoover |
|---|---|
| Model | FH40150 Series |
| Category | Vacuum Cleaner |
| Language | English |
Lists all items included in the product packaging for both series.
Step-by-step guide to attach the handle to the cleaner base.
Details about the clean water and solution tank.
Instructions for filling the clean water tank with solution.
Information about the dirty water tank.
Steps for emptying the dirty water tank.
Identification of handle, triggers, mode selection, switches, and pedals.
Identification of clean and dirty water tanks and release buttons.
Features for managing and storing the power cord.
Identification of the nozzle and its release mechanism.
Steps for cleaning the cleaner's nozzle.
Steps for cleaning the cleaner's brushes.
Information about motor lubrication.
Solutions when the cleaner does not power on.
Solutions for low suction or poor pick-up.
Causes and solutions for water puddling.
Solutions when cleaning solution is not dispensed.
Solutions when the brushes do not rotate.
Guide listing Hoover cleaning products for the appliance.
Using the handle release pedal and power switch.
Instructions for moving the cleaner and storing the cord.
Guidance on when to empty the dirty water tank.
Steps for emptying the dirty water tank.
Contact information for customer support and service.
Details on what the warranty covers and how to make a claim.
Details on what the warranty excludes and other important terms.
