To Next PageTo Next PageWhat to do if my Hoover HFX20P 011 Vacuum Cleaner shows E5 error?
The E5 error code indicates a blockage in your Hoover vacuum cleaner. You should empty the bin, clean the filters, clean the nozzle and brushbar, and check for any blockages.
What to do if the nozzle window is incorrectly assembled on my Hoover HFX20P 011 Vacuum Cleaner?
If the nozzle window on your Hoover Vacuum Cleaner is incorrectly assembled, check if it's correctly assembled and in place. Gently press the window down until it clicks securely. Also, verify that the main body is correctly assembled. After that, switch off your product and wait for 20 minutes, then restart it.
How to fix E0 error on Hoover Vacuum Cleaner?
The E0 error on your Hoover Vacuum Cleaner indicates that the handheld or main body is not in the correct position. Check if the handheld and the main body are assembled correctly.
General| Model | HFX20P 011 |
|---|---|
| Category | Vacuum Cleaner |
| Type | Handheld |
| Cordless | Yes |
| Charge time | 2.5 hours |
| Filter Type | Washable |
| Run time | 40 minutes |
