NOTE: The red dot next to power level indicator will
illuminate indicating that zone is selected.
6. When cooking timer expires, the corresponding
cooking zone will be automatically switch off and show
“H”.
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone
off
1. If use this function to more than one heating zone, the timer indicator will show
the shortest time.
(e.g. zone 1# setting time of 2 minutes, zone 2# setting time of 5 minutes,
the timer indicator shows “2”.)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating
zone slide control one time. The timer will indicate its set time.
(set to 5 minutes)
(set to 2 minutes)
2. When cooking timer expires, the corresponding
heating zone will be automatically switch off and show
“H”.
NOTE: If you want to change the time after the timer is set, you have to start
from step 1
To Next Page
Loading...
Need help?
General
