before doing any maintenance work.
• The iron must not be le unaended
while it is connected to the supply mains
and before it has cooled down.
• Do not unplug the appliance by pulling
on the cord or on the appliance.
• Never immerse the iron, the stand, the
cable or the plugs in water. Never hold
them under the water tap.
• The soleplate of the iron can become
extremely hot and may cause burns if
touched. Never touch the electric cords
with the soleplate.
• If the supply cord is damaged, it must
be replaced by the manufacturer, service
agent or similarly qualied persons in
order to avoid a hazard.
• When placing the iron on its stand,
ensure that the surface on which the stand
is placed is stable.
• The plug must be removed from the
socket-outlet before the water reservoir is
lled with water.
• The surfaces with
are liable to get
hot during use.
• To have a electronic copy of the
instrucon manual contact the aer sales
service in guarantee card.
• The iron must be used and rested on a
stable surface.
Important Safety Instrucons
To Next Page
Loading...
