Hoover IronSpeed - Page 8

7
7
Texle Soleplate T°C
Wrinkled Texles •••/Max
Tricky Zone ••/•••
Jeans Max
Coon •••
Linen Max
Starched Clothes •••
Velvet/Alcantara ••
Wool ••
Silk ••
Cashmere ••
Rayon ••
Polyester •
Nylon •
Acrylic •
Lycra •
Polyamid •
To obtain the best results, it is important to set the correct temperature of the soleplate.
Chapter 3.3 - How to choose the Correct Soleplate temperature
Chapter 3.4 - Vercal Steam Ironing
Set the soleplate temperature (6) to the max temperature.
Hang curtains and clothes (jackets, suits, coats). Hold the iron in vercal posion at
a short distance of the fabric to avoid burning it. Press the steam trigger (7) to steam
iron moving it from top to boom.
Warning: Do not direct the steam jet towards people or animals
Help
When steam ironing clothes on which shiny patches may occur, we recommend you to set
the soleplate temperature to a lower temperature or to iron the garment on the reverse.
Start with the fabrics that needed to be ironed at a lower temperature (•) and nish
with those that needed to be ironed at the higher temperature (•••/Max).
Chapter 3.5 - Relling the Water Tank During Usage
You can ll the water tank at any me during use.
When the water tank is empty, the “Empty water tank” light (1B) will switch on.
No more steam escapes from the soleplate.
Open the water tank ller cover (3) and rell the water tank with the help of a bole
of water without exceeding the max mark level.
Please refer to chapter 2.2 for more detailed instrucons.