EasyManua.ls Logo

Hoover POWERDASH GO - Cord Storage; Before You Begin Cleaning

Hoover POWERDASH GO
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Before You Begin Cleaning
Wrap cord around the cord hooks for convenient
storage. Attach the plug end to the cord.
For fast cord release, simply turn upper cord wrap
downward.
Cord storage
NOTE: To prevent staining, use
plastic or aluminum foil to
protect wood or metal surfaces
from possible water spray.
NOTE: To avoid damage to wood
floors underneath area rugs or
carpet, place waterproof material
(e.g. plastic underneath them
before cleaning.
ATTENTION: Some Berber,
Natural Fiber, and Soft Fiber
carpets can fuzz with wear. Some
vacuums & carpet cleaners can
worsen this carpet wear. Test a
hidden area before using on a
full room & consult with your
carpet manufacturer on cleaning
recommendations.
Don’t use the carpet cleaner as a dry
vacuum cleaner.
Use your HOOVER
®
portable carpet
cleaner only if upholstery fabric is
marked with a “W” (for “wet” clean)
or “S/W” (for “solvent/dry” or “wet”
clean). Don’t clean fabric marked “S
(“solvent/dry” clean only).
Test for colorfastness in a small,
hidden area. Gently rub surface with
a dampened white cloth. Wait ten
minutes and check for color removal
or bleed with a white paper towel.
Move furniture out of area to be
cleaned. Place aluminum foil or
wax paper under legs of furniture
too heavy to move to prevent wood
finishes from staining carpet. Pin up
furniture skirts and draperies.

Related product manuals