Hoover POWERDRIVE UH74225CDI User Manual

11
Rinse foam filter
and filter frame
under running
water until all
debris is clear.
4
Maintenance
Cleaning the Filters
Pre-Motor Filter
WARNING
To reduce the risk of personal injury, unplug before cleaning or servicing.
Let foam filter
and frame air dry
separately for at
least 24 hours prior
to reassembling and
reinstalling back
into the vacuum to
ensure the filters
dry completely.
6
24H
Remove the dirt cup
to locate the filter.
1
Use the PULL tab to
remove the filter.
2
Separate the foam
filter from the filter
frame.
3
Gently squeeze filter
to remove excess
moisture.
5
TIP:
Replace filters when heavily discolored.
Set filter frame on its side when drying to
allow excess moisture to drain o.

Hoover POWERDRIVE UH74225CDI Specifications

General

Brand	Hoover
Model	POWERDRIVE UH74225CDI
Category	Vacuum Cleaner
Language	English