Hoover PowerScrub XL+ User Manual

QUICK START GUIDE
Fill Tank with Water up to MAX line located on side of the tank. Follow
steps on solution bottle to add the appropriate amount of solution to
tank.
Attach Handle.
CLICKCLICK
CLICKCLICK
GETTING STARTED
HOW TO USE: MAIN UNIT
SQUEEZE TRIGGER
WASH
RELEASE TRIGGER
DRY
Slowly Push forward and squeeze trigger to wash. Release Trigger and
slowly pull unit back to Dry carpet. Repeat and move to new section.
Recline
On/Off
Use pedals to operate.
1
1
2
2
POWER
SCRUB
TM
XL
CARPET & UPHOLSTERY
CLEANER

Hoover PowerScrub XL+ Specifications

General

Weight	18.5 lbs
Tank Capacity	1.5 Gallons
Cleaning Path Width	12 inches
Cord Length	20 ft
Heated Cleaning	Yes
Brush System	SpinScrub Brush System
Width	13 inches
Height	44 inches
Color	Red
Type	Upright
Included Tools	Upholstery Tool

Summary

Getting Started

Attach Handle

Connect the main handle to the cleaner base securely.

Fill Solution Tank

Add water to the MAX line and follow bottle steps for solution.

Operating the Main Unit

Use Pedals to Operate

Utilize the pedals to control the cleaner's functions.

Trigger Controls for Washing and Drying

Squeeze trigger to wash, release to pull back and dry.

Above Floor Cleaning

Hose and Tool Attachment

Attach the hose and then the desired tool for above floor cleaning.

Spray and Scrub Function

Use the spray/scrub function for effective cleaning.

Cleaning and Maintenance

Remove Dirty Water Tank

Detach and empty the dirty water tank.

Nozzle Cover Removal

Pull to remove the nozzle cover for cleaning.

Brush Removal and Reinsertion

Press tabs to remove brushes; push back until they click to reinsert.

Quick Clean Mode Operation

Engage Quick Clean Mode

Turn knob counter-clockwise to engage Quick Clean Mode.