Hoover REACT QuickLift UH73301 - Baseboard Duster Usage and Cleaning

9
1
2 3 4
Uniquely designed to effortlessly clean fine dust from baseboards.
Remove wand from
vacuum spine and
attach tool to the
end of the wand.
Align the cleaning
pad to the bottom
of the tool by
pressing firmly.
Detach canister
from spine and use
in QuickLift
TM
Mode.
Align the
Baseboard Duster
with pad against
the baseboard
and wheels
touching the
floor, then glide
along baseboard.
Directions for Use: Baseboard Duster
***
1
1
2 3 4
Remove cleaning
pad from Baseboard
Duster by pulling
gently from one
edge.
Remove tool from
wand.
Hand wash only with
warm water and
mild detergent.
Tumble dry on low.
Directions for Cleaning: Baseboard Duster
***
1
***Tools vary by model number. Refer to hoover.com for tools included in each model.
Tip - Do not use Baseboard Duster if pad is wet. Only use if cleaning pad is completely dry.