8
Assembly
Push the Handheld
down onto the Reach
Wand until it clicks
into place.
Push the Reach Wand down
onto the Powered Nozzle until
it clicks into place.
Before rst use be sure to fully
charge the battery.
TIP: Charging your ONE PWR
™
Lithium Battery may take up to
3 hours.
1 2 3
WARNING
To reduce the risk of personal injury, remove
battery before cleaning or servicing.
IMPORTANT
This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance always
lie flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on.
To Next Page
Loading...
