9
Mounting the Wall Bracket
First, fully assemble the vacuum but do not attach the battery.
Set the vacuum aside. Mark the
Wall Anchor locations. Install
the anchors and screw the Wall
Bracket to the wall.
IMPORTANT: Use BOTH screws to
mount the Wall Bracket to wall.
Snap the Wall Bracket arm into
the Wall Bracket and screw
into place. Hold the vacuum
against the wall. Position
the Wall Bracket behind the
Handheld so that the hook
holds the vacuum.
TIP: The Floor Nozzle must be at
on the ground for proper wall
mounting.
Slide Tool Storage Part into the
slot on the Wall Mount Bracket
until it locks into place.
1 32
Store the Vacuum on the Wall
Bracket arm.
4
To Next Page
Loading...
