Why is my Hoover Vacuum Cleaner losing suction?
Low suction can occur if the recovery tank is full and the automatic shut-off is engaged. Empty the recovery tank to resolve this. Also, ensure that the recovery tank cap is securely latched.
What to do if my Hoover SteamVac Agility F6211 won’t run?
If your deep cleaner won’t run, first ensure that it is plugged in firmly. If it still does not run, check the fuse or breaker.
What to do if my Hoover Vacuum Cleaner cleaning solution won’t dispense?
If the cleaning solution won’t dispense, make sure the solution tank is securely in place. Also, refill the solution tank if it is empty.
Why is there low suction in the hose during tool use with my Hoover SteamVac Agility F6211 Vacuum Cleaner?
If you experience low suction in the hose during tool use, ensure that the recovery tank cap is securely latched. Additionally, disconnect the hose from the cleaner and check for any blockages in the hose.
General| Type | Upright |
|---|---|
| Power | 12 amps |
| Power Source | Corded Electric |
| Tank Capacity | 1 gallon |
| Hose Length | 8 feet |
| Features | Heated cleaning, automatic detergent mixing |
| Attachments | Upholstery tool |
| Warranty | 1 year |
Lists the main deep cleaner unit included in the carton for unboxing verification.
Lists the cleaning detergent included in the carton for unboxing verification.
Identifies and describes all components and parts of the HOOVER Deep Cleaner.
Instructions on how to correctly fill the solution tank with water and detergent.
Procedure for cleaning the nozzle of the deep cleaner after use.
Steps to remove and clean the brushes assembly of the deep cleaner.
Instructions for cleaning the brush filter on the deep cleaner.
To Next Page