Hoover WH20400 Series User Manual

11
4 5
To produce steam,
squeeze the trigger. To
prevent over wetting
floors avoid holding the
trigger continuously.
Move the steam mop slowly
backwards and forwards
across the floor paying
particular attention to high
traffic areas. Squeeze/
release trigger as required.
TO SANITIZE
HARD
SURFACES
Select the
"STEAM ONLY"
setting.
Connect the
microber pad and
run a minimum
of 6 strokes at
a medium pace
(5-7 seconds per
32" stroke) across
same area. Allow
to dry.
6
To engage SteamStream™ from the front
nozzle press the SteamStream™ button to
activate and squeeze the trigger to release
steam. Press the SteamStream™ button to
turn OFF (0=OFF).

Hoover WH20400 Series Specifications

General

Brand	Hoover
Model	WH20400 Series
Category	Steam Cleaner
Language	English