Hoover Steam complete pet User Manual

QUICK START GUIDE
1 2
Plug in your Steam Complete Pet
and turn it on. Allow 60 seconds
for your unit to heat up, and adjust
both dials to your desired setting.
Adjust steam dial to desired
setting. Utilize the Supplemental
water tank by turning dial to
large area when cleaning large
spaces and turn the dial to
small area for quick cleaning.
3
Pull trigger in short bursts to
produce steam and clean. To
prevent over saturating floors,
avoid holding down the trigger
continuously.
TO ENGAGE STEAMSTREAM
Press the button on floor head to
activate, and squeeze trigger to
release the steam. Press button
again to deactivate.
FOR BEST PERFORMANCE
Use distilled water.
TO RELEASE THE TILE AND GROUT
SCRUB BRUSH
Place foot on outer floor head and
gently pull away steam cleaner.
PRO TIPS

Hoover Steam complete pet Specifications

General

Brand	Hoover
Model	Steam complete pet
Category	Steam Cleaner
Language	English

Summary

Quick Start Guide

Initial Setup and Heating

Plug in and turn on the unit, allow 60 seconds for heating, and adjust dials.

Adjusting Steam Settings

Adjust steam dial and use supplemental water tank dial for large or small cleaning areas.

Steam Application Technique

Pull trigger in short bursts for steam. Avoid continuous trigger hold to prevent over-saturation.

Engage SteamStream Feature

Press floor head button to activate, squeeze trigger to release steam. Press again to deactivate.

Release Tile and Grout Brush

Place foot on outer floor head and gently pull the steam cleaner away to release the brush.

Performance Recommendation

Use distilled water for best performance.

Tools for Every Mess

Remove Handheld Unit

Lift the release button and pull away from the cleaner. Remove water tank before use.

Attach Small Accessories

Connect small tools to the concentration nozzle by twisting clockwise until locked.

Attach Large Accessories

Connect large tools or hose to the concentration nozzle by twisting clockwise until locked.