Features
O Use the following to identify the
parts and features of your cleaner.
Your model will resemble one of the two
illustrations shown below.
1. Soft grip handle/wand assembly
2. Tag Along TM grip
3. Powered pethair cleaning tool
4. POWER button
5. Carry handle
6. Bag door
7. Headlight
8. Edge groomers
9. Furniture guard
10. Embedded DirtFinder TM (some
models)
11. Surface Command _Mcontrol dial
(some models)
12. Surface Selector (some models)
13. Hose connector
14. Hose
15. Telescoping handle/wand
16. Cord clip
17. Hose clip
18. Furniture nozzle
19. Dusting brush
20. Cord rewind button: press but-
ton to rewind cord for storage. Hold
plug until cord is rewound.
21. Crevice tool
22. Cord reel
23. Handle release pedal
24. Soft wheels
Operate cleaner only at voltage specified on data plate on the back of the cleaner.
This cleaner is intended for household use.
15
20
21
Polarized plug
To reducethe risk of electric shock, this appliance has a polarized plug (one blade iswider than the other). This plug will fit in a
polarized outlet only one way.
If the plug does not fit fully in the outlet, reversethe plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
06
To Next Page
Loading...
Need help?
General
