Horiba Scientific LAQUA F-72 User Manual

Remove the protective cap.
Open the internal solution ller port.
pH
9
pH
9
pH
4
pH
4
pH
7
pH
7
January, 2017 © 2017 HORIBA Advanced Techno Co., Ltd.
Preparation
pH/ ION/ COND METER F
-
74
CAL MEAS DATA
pH/ ION / COND METER F
-
74
CAL MEAS DATA
CODE
:
GZ0000272694B
Quick Manual
pH Meter F-72,73,74
② Connect the electrode to the pH meter
Electrode terminal
③ Press the power button of the pH meter
①Prepare pH standard solutions
Temperature sensor terminal
☆ Press the power button for 2 seconds.
※ Wait for 10 seconds after connecting
the AC adapter before pressing
the power button.
④ Remove the protective cap from the electrode,
and open the internal solution ller port

Horiba Scientific LAQUA F-72 Specifications

General

Measurement Parameters	pH, ORP, Conductivity, Temperature
pH Resolution	0.01 pH
pH Accuracy	±0.01 pH
ORP Resolution	1 mV
ORP Accuracy	±1 mV
Conductivity Accuracy	±1% of reading
Temperature Resolution	0.1°C
Temperature Accuracy	±0.5°C
Data Memory	1000 data sets
Communication Interface	USB
pH Range	0 to 14 pH
Conductivity Range	0 to 199.9 mS/cm
Calibration Points	pH: Up to 5 points
Display	LCD
Outputs	USB
Power Supply	AC adapter
Power	4 x AA Batteries
Dimensions	170(W) x 174(D) x 73(H) mm
ORP Range	±1999 mV
Conductivity Resolution	0.01 µS/cm