Horizon Fitness AFC-566F User Manual

I
• This manual is designed to help you to install, operate and maintain the AFC-
566F Cross Folder. Please read and understand this manual, and keep it in a
safe and convenient place.
• Do not operate the AFC-566F until you read and understand the instructions in
this manual.
• Horizon International Inc. shall not be liable for incidental consequential
damages resulting from: improper or inadequate maintenance by the customer,
unauthorized modification or misuse, or operation outside of the environmental
specifications for the product.
• Horizon International Inc. pursues a policy of continuing improvement in design
and performance of the product. Therefore, the product design and
specifications are subject to change without prior notice and without our legal
obligation.
• All rights are reserved. No part of this manual may be photocopied, reproduced
or translated to another language without the prior written consent of Horizon
International Inc.
Important Information
CROSS FOLDERCROSS FOLDER
AFC-566F
170228/566F/32E/TI,TM,AT/F7/ICS5.5/PXI
UM203051-32(000)
*UM203051*

Horizon Fitness AFC-566F Specifications

General

Brand	Horizon Fitness
Model	AFC-566F
Category	Folding Machines
Language	English

Summary

Horizon AFC-566F Important Information

Safety Precautions

Safety Symbols and Meanings

Explains the meaning of safety symbols used in the manual.

Operating Safety Precautions

WARNINGS for Operation

Lists critical warnings for operating the machine safely.

CAUTIONS for Operation

Lists cautionary notes for operating the machine safely.

WARNINGS for Installation

Warning Label Locations and Meanings

Machine Description

1-1 Machine Description

Provides an overview of the machine's components and their functions.

1-2 Touch Panel Description

Explains the functions and operation of the touch panel interface.

1-16 Control Panel

Describes the main control panel buttons and functions.

Overview of Setup Procedure

2-1 Overview of Basic Setup

Outlines the steps for the initial setup of the machine.

2-2 Overview of Fine-Tuning

Introduces the process of fine-tuning machine adjustments.

Basic Setup

3-1 Turn On the Power Switch

Instructions on powering on the machine and initial screen display.

3-2 Setting the Fold Pattern and Sheet Size

Guides on selecting fold patterns and inputting sheet dimensions.

3-4 Loading the Sheets on the Table

Instructions for correctly loading sheets onto the machine's table.

3-5 Setting the Suction Head

Explains how to adjust the suction head for optimal sheet pickup.

Fine-Tuning Adjustments

4-1 Setting the Belt Speed

Adjusting the speed of the fold rollers and transport belts.

4-4 Adjusting Fold Skew in Parallel Folding

Guides on correcting skewed folding in parallel folding.

4-7 Setting the Perforation Blades and Scoring Blades

Instructions for setting perforation and scoring blades.

4-9 Adjusting Fold Skew on Buckle Chute below Knife

Guides on correcting fold skew in the buckle chute.

Starting and Running the Job

5-1 Setup the Main Screen

Instructions for configuring the main operating screen before starting a job.

5-2 Starting Folding

Step-by-step guide to initiate the folding process.

Troubleshooting

6-1 If an Error Icon Appears on the Screen

Explains error icons and their corresponding recovery procedures.

6-2 If a System Error Code Appears on the Screen

Lists system error codes and troubleshooting steps.

6-3 Problems in the Feed Section

Addresses common issues related to the sheet feeding mechanism.

6-9 General Folding Problems and Remedies

Visual guide to common folding defects and their solutions.

Maintenance

7-1 Cleaning the Vacuum Piston

Instructions for disassembling and cleaning the vacuum piston.

7-2 Disassembling and Cleaning the Pump Filter

Guides on cleaning the pump filter for optimal pressure.

7-5 Removing and Installing the Perforation Shaft

Step-by-step guide for removing and installing the perforation shaft.

7-10 Replacing the Carbon Blades of Pump

Guides on replacing worn carbon blades in the pump.

Installation

8-1 Machine Installation

Covers the initial steps for placing and leveling the machine.

8-2 Pump Power Cable Connection

Instructions for connecting the pump's power cable.

8-6 Connecting the Power Cables

Steps for connecting the main power cables to the machine.

Appendix

9-1 Specifications

Technical specifications of the machine's components and performance.

9-2 Accessories

Lists and illustrates included and optional accessories.

9-4 Options

Details on optional components and blades.