Horizon Fitness FC-20A User Manual

I
UM201051-03
020723/FC20A/03E/DV
Important Information
- This manual is designed to help you to install, operate and maintain Fore-edge Trim-
mer, FC-20A. Read, understand and keep this manual in a safe and convenient place.
- Do not operate FC-20A until you read and understand the instructions in this manual.
- Horizon International Inc. shall not be liable for incidental consequential damages
resulting from : improper or inadequate maintenance by customer; unauthorized modifica-
tion or misuse; operation outside of the environmental specifications for the product.
- Horizon International Inc. pursues a policy of continuing improvement in design and
performance of the product. Therefore, the product design and specifications are subject to
change without prior notice and without our legal obligation.
- All rights are reserved. No part of the manual may be photocopied, reproduced or
translated to another language without the prior written consent of Horizon International Inc.
FC-20A
FORE-EDGE TRIMMER

Horizon Fitness FC-20A Specifications

General

Brand	Horizon Fitness
Model	FC-20A
Category	Trimmer
Language	English

Summary

Important Information

Safety Precautions

Before You Begin

FC-20A Specification

Details the technical specifications of the FC-20A machine, including dimensions, trimming capacities, and power requirements.

Safety Devices and Functions

Explains safety cover and emergency stop button functionality for safe operation.

General Machine View

Provides a general view of the FC-20A, highlighting delivery conveyor, trim section, control panel, and trimmings box.

Press Section Details

Details components of the press section, including roller and plate adjustment mechanisms.

Control Section Overview

Describes the control panel, including inching buttons, counters, and indicator lamps.

Setup and Operation

SPF-20A and FC-20A Positions

Explains how to adjust the positions of the SPF-20A and FC-20A units for proper operation.

Trim Section Setup

Details the steps required to set up the trim section of the FC-20A machine.

In-Feed Roller Pressure Adjustment

Describes how to adjust the in-feed roller pressure using the pressure adjust bar on three scales.

Press Plate Height Adjustment

Explains how to adjust the press plate height using the adjust knob to match booklet thickness.

Hold Roller Pressure Adjustment

Details how to adjust the hold roller pressure according to booklet thickness using the pressure adjust knob.

Binding Start Procedure

Provides instructions on how to start the binding process and operational modes.

Trimmings Clearance

Explains the procedure for clearing trimmings from the machine's trimmings box.

Maintenance

Knife Replacement

Provides detailed instructions for replacing both the upper and lower knives on the FC-20A.

In-feed Roller and Transport Belt Cleaning

Details the process for cleaning the in-feed rollers and transport belts using an alcohol-soaked cloth.

Grease Application for the Knife

Explains the procedure for applying grease to the knife, including cautions and frequency.

Move and Installation

Moving the FC-20A

Provides instructions on how to safely move the FC-20A machine, including disconnections and base removal.

Installing the FC-20A

Details the steps for installing the FC-20A machine, including connections, alignment, and component attachment.