Why won't the motors start in Smart Mode on my Horizon Hobby Quadcopter?
The motors might not start in Smart Mode because the rate mode switch is set to low. To resolve this, set the transmitter dual rate switch to hi. Also, ensure that a GPS signal is acquired. Another potential cause is that the rudder trim is not centered; if so, center the rudder trim.
What to do if GPS will not lock on Horizon Hobby Quadcopter?
If the GPS on your Horizon Hobby Quadcopter won't lock, several factors could be the cause. Heavy overcast conditions, solar flares, or being indoors can prevent GPS lock. Wait for lighter cloud cover or for the solar disturbance to subside, or disable GPS. Ensure the aircraft has a clear view of the sky, free from obstructions like metal covers or tall buildings. A nearby video transmitter can also interfere; try repositioning or removing it.
Why won't the motors start in Stability/Agility Mode on my Horizon Hobby Quadcopter?
The motors might not start in Stability/Agility Mode because the rate mode switch is set to low. To fix this, set the transmitter dual rate switch to hi. Another potential cause is that the rudder trim is not centered, so center the rudder trim.
What to do if Horizon Hobby Quadcopter GPS functions are not operating properly?
If the GPS functions on your Horizon Hobby Quadcopter aren't working correctly, it could be due to several reasons. The compass may have been exposed to a magnet; move the aircraft away from the magnetic source, or replace the compass if necessary. Check if the GPS antenna coaxial cable is damaged and replace the GPS antenna if needed. If the aircraft is behaving erratically, rebind it with the GPS function off. Avoid aggressive flight and fly level for a few seconds before switching into other modes.
What to do if Horizon Hobby 350 QX will not initialize?
If your Horizon Hobby 350 QX won't initialize, it might be because the quadcopter was moved during initialization. Re-arm the aircraft, being cautious to avoid any movement during initialization. Another reason could be that the throttle trim is not in the correct position. The trim may need to be adjusted a click above or below center.
What to do if Horizon Hobby Quadcopter GPS has reduced resolution?
If the GPS on your Horizon Hobby Quadcopter has reduced resolution, it could be due to a raised threat level by the U.S. government; wait for the threat level to be reduced or disable GPS. Another cause could be that the GPS antenna coaxial cable is damaged; replace the GPS antenna in this case.
General| Type | Quadcopter |
|---|---|
| Brand | Horizon Hobby |
| Model | Blade 350 QX RTF |
| Main Rotor Diameter | 350 mm |
| Battery | 3S 11.1V 3000mAh LiPo |
| GPS | Yes |
| Camera | Optional |
| Channels | 5 |
| Flight Time | 15 minutes |
| Transmitter | Spektrum DX5e 2.4GHz |
| Control Range | 300 meters |
Clarifies the meaning of NOTICE, CAUTION, and WARNING for safe operation.
Specifies the minimum age requirement for operating the 350 QX.
Explains the LVC system for protecting the Li-Po battery from over-discharge.
Specific steps to install the included camera frame onto the isolation mount.
Details switch positions, modes, and rates for different Spektrum transmitters.
Details the binding process, including modes and specific transmitter code inputs.
Explains functions like Return Home, Position Hold, and Self-Leveling enabled by GPS.
Describes Smart Mode features like Stick Relativity, Position Hold, and Self-Leveling.
Details Stability Mode features including Self-Leveling and Position Hold.
Describes Agility Mode for aerobatic flight, with proportional thrust control.
Lists and explains the different audible alerts the aircraft can produce.
Explains LED patterns during initialization and various operational states.
Explains LED signals indicating the status of calibration procedures.
Details features like Position Hold and Return Home when GPS is on or off.
How the aircraft behaves in Smart, Stability, and Agility modes when GPS fails.
Aircraft actions taken when the transmitter signal is lost.
Explains how throttle input corresponds to altitude changes in Smart Mode.
Steps for safely initiating takeoff in Smart Mode.
Instructions and precautions for activating the automatic Return Home feature.
Explains the audible alert that helps locate the aircraft after landing.
Detailed instructions for disassembling and reassembling the aircraft body.
Instructions for performing the manual compass calibration process.
Instructions for performing the accelerometer calibration process.
Specifies what the Horizon Hobby warranty covers and what it does not.
Outlines the remedies available to the purchaser under the warranty terms.
Formal statement confirming conformity with EU directives and specifications.
To Next Page
