HORL 2 PRO - Key Sharpening Steps; Step 1: Affix the Knife; Step 2: Grind the Blade; Step 3: Hone the Edge

19
1. AFFIX
Place the magnetic angle support
with its silicone feet on a worktop and
attach the knife to the contact pad
so that it is held securely level with its
edge facing upwards.
2. GRIND
Hold the sharpener on the worktop by the roller
grip with one hand and press firmly on the
magnetic angle support with the other hand.
Move the roller of the sharpener back and
forth in smooth movements and with only slight
pressure of the diamond grinding disc along the
entire cutting edge.
THE IMPORTANT STEPS
3. HONE
To refine the cutting edge and remove
any burr, rotate the sharpener 180°
and repeat step 2 with the ceramic
honing disc.
4. OTHER SIDE
Turn the knife around and repeat steps
1 to 3 with the other side of the blade to
achieve an even sharpening result.