12
Please note, that the first use of the Rolling Sharpener
usually takes between 1-5 minutes, until the optimal grin-
ding angle of 15° is applied on both sides of the blade.
The time of sharpening depends on the initial condition
of your knife. Due to the unvarying angle, the process of
resharpening only takes a few motions back and forth,
to get your blade razorsharp again.
When using the Rolling Sharpener for the first times,
excessive diamond particles peel away from the grinding
side and can cause a noticeable scratching sound – your
knife does not get damaged nor does the sharpener lose
quality! After a few uses, the noise reduces and the grin-
ding side reaches the desired smooth surface.
BEFORE YOU START
The Magnetic Angle Support (MAS) keeps your knife constantly
safe in the optimal grinding angle of 15°. The 15° sharpening
angle is the perfect mix of stability and sharpness and is applied
as default on most knives.
Before usage make sure that blade and magnets are always
clean to prevent scratches. Put a thin piece of cloth between the
magnets and the blade if the blade is very sensitive. Always
clean your blade thoroughly after sharpening.
To Next Page
Loading...