Hornady Lock-N-Load 366 Auto

Need help?

Do you have a question about the Hornady Lock-N-Load 366 Auto and is the answer not in the manual?

Summary

Shell Reloading Instructions

Standard Loads and Bushings

Information on standard loads and bushings for the reloader.

Setting Up Your 366 Auto

Function and Adjustment Guide

Station 1 A: Resize and Deprime

Station One: De-Prime Only

Station Two: Prime

Station Three: Drop Powder

Station Four: Wad Seating

Station Five: Shot Drop

Station Six: Crimp Start

Station Seven: Crimp

Station Eight: Taper Crimp

Auto Advance Adjustment

Troubleshooting Operational Issues

Handle Movement Problems

Resolve problems with operating handle movement.

Primer Feed Issues

Solutions for primers not dropping or dropping erratically.

Wad Seating and Tipping

Troubleshooting steps for issues with wad seating.

Crimp Appearance and Function

Addressing issues with shell crimp appearance and function.

Gauge Conversion and Notes

Wad Pressure Recommendations

Recommendations for wad types and pressure.

Important Disclaimers

Disclaimer regarding component variations and manufacturer responsibility.

Powder Bushing Chart

Exploded View Diagram

Bill of Material List

Shot Charge Bushings Chart

Field Load Bushings Chart

Steel Shot Bushings Chart