What to do if HORNER APG Touch terminals XL7 OCS will not download project file?
If your HORNER APG XL7 OCS won't download the project file, ensure that the project file is saved as a .pgm file and not a .csp file. Also, the file's I/O configuration must match the XL7 configuration for it to download successfully.
Why is communication not established to the target controller in HORNER APG XL7?
If communication to the target controller isn't established for your HORNER APG Touch terminals, verify the controller's node ID and ensure the Target setting matches it. Also, confirm that a local connection is established.
What to do if Cscape has accessed a PC COM port but is not communicating with the HORNER APG Touch terminals controller?
If Cscape has accessed a PC COM port but is not communicating with the controller for your HORNER APG Touch terminals, this typically means that the controller is not physically connected.
Why is Cscape unable to access the COM port of the PC for HORNER APG Touch terminals?
If Cscape is unable to access the COM port of the PC for your HORNER APG Touch terminals, it might be configured for a COM port that doesn't exist or is being controlled by another program. Note that only one Cscape window can access a port at a time.
How to fix HORNER APG Touch terminals XL7 OCS when it does not read media card?
If your HORNER APG XL7 OCS isn't reading the media card, format the media card using the XL7 OCS.
General| Display Type | TFT LCD |
|---|---|
| Resolution | 800 x 480 pixels |
| Power Supply | 24 VDC |
| Enclosure | Plastic |
| Mounting | Panel Mount |
| Display Size | 7 inches |
| Touchscreen | Resistive |
| Memory | 128 MB Flash |
| Communication Ports | Ethernet, USB, RS-232/485 |
| Operating Temperature | 0°C to 50°C |
| Protection Rating | IP65 (Front) |
To Next Page