Need help?Do you have a question about the Hornet 563T and is the answer not in the manual?
General| Remote Range | Up to 1 Mile |
|---|---|
| Number of Buttons | 5 |
| LCD Remote Display | Yes |
| Battery Backup | Yes |
| Features | Keyless Entry, Remote Start |
| System Type | 2-Way |
| Alarm Features | Siren |
Explains how individual and combined button presses control system functions like arming, disarming, and remote start.
Lists the physical parts included with the remote start alarm system package.
Emphasizes that installation must be done by an authorized dealer to avoid voiding the warranty.
Information on system maintenance and battery life for the remote.
Details on completing and returning the warranty registration card and proof of purchase.
Statement on compliance with FCC rules and warning against unauthorized modifications.
Product is designed for fuel injected, automatic transmission vehicles only.
Details standard configuration button functions for arming, disarming, and auxiliary outputs.
How to activate Remote Start and secondary auxiliary functions via button combinations.
Crucial safety warnings for system installation and operation, especially regarding enclosed spaces.
How to manually arm the system, including confirmation chirps and LED indications.
Automatic system arming and how the system protects the vehicle upon activation.
How to arm the system while the vehicle is running.
Procedure to disarm the system using the transmitter, including confirmation chirps.
Silencing and resetting a triggered system without disarming it.
Manual disarm procedure using ignition key and Valet switch.
Temporarily turning off arm/disarm chirps for specific operations.
Preventing automatic arming and triggering for service or washing.
How to activate Panic Mode to attract attention and how to stop it.
Step-by-step instructions for initiating a remote start sequence using the transmitter.
How to turn the rear defogger output ON or OFF when remote starting.
Valet Take-Over and Short-Run/Turbo modes for extended engine operation.
Using timer or temperature settings to start the vehicle remotely.
Details on Starter Anti-Grind, disabling Remote Start, and Over/Under Rev Protection.
Critical shutdown inputs and Nuisance Prevention Circuitry against false alarms.
Indicates arming confirmation and Bypass Notification via siren chirps.
Tamper Alert and NPC bypass indications via extra chirps during disarming.
Siren chirp patterns indicating system status like arming, disarming, alerts.
Mapping LED flashes to specific input types like trunk pin, shock sensor, door switch.
Using LED blink patterns to identify triggered zones and system memory.
Algorithm for changing transmitter codes to increase system security.
System transmits and receives at 434 MHz for cleaner spectrum and stable signal.
Feature allowing different settings per transmitter for multiple users.
Rapid Resume Logic and Power Saver Mode for system state recall and battery efficiency.
Lists various programmable options for system setup, including arming modes and lock features.
Lists optional modules like Audio Sensor, Backup Battery, and Hood Lock.
Definitions of technical terms used throughout the manual, such as Control Unit, Input, and LED.
Provides a concise summary of common actions like arming, disarming, and remote starting.
Details about Directed Electronics, its history, and commitment to quality products.
To Next Page
