EasyManua.ls Logo

HORNIT HERO - Page 2

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 2
To avoid serious injury:
Adult assembly is required by a competent person. If you are unsure
about anything please use a qualified bicycle mechanic.
A cycle helmet, appropriate clothing and footwear should be worn.
Use only in a safe location and under the supervision of an adult until
the rider has appropriate skills for their environment including road
safety and awareness. Remember children are less visible in traffic.
If riding in low light then use lights and reflective equipment.
In case of an accident please check the bike for damage to make sure
it’s safe to continue riding.
HERO is made for rides on paved and unpaved roads, tracks and light
trails. It is fine with small jumps and bumpy terrain. It is not designed
for BMX style, stunt riding or downhill racing. Nor adults! HEROs have
been tested up to 60kg.
WARNINGS ASSEMBLY
Your HERO bicycle has been checked, tuned and carefully repacked by one of
our mechanics before being shipped to you. It will need the front wheel and
handlebars to be reattached by following these instructions. You will need the
following tools:
4 & 5mm
Allen keys
15mm or Adjustable
Spanner
Phillips
Screwdriver
It is important to note that different bolts have different torque requirements.
Over-tightening bolts can damage them. Torque measurements are given in
Newton meters (Nm).