To Next Page
V
vdoyleAug 3, 2025
Why is the placing quantity too low on my horsch Farm Equipment?
- JJames HoodAug 3, 2025
The placing quantity might be too low on your horsch Farm Equipment because: the sealing lip in the metering unit is worn (replace the sealing lip); the placing quantity is set too low (check the adjustment on the terminal and correct as required); the pressurized hopper of twin hopper machines is leaking (check the hopper for leak tightness and replace the seals if necessary); or the pneumatic system is leaking (check the distributor and all pneumatic hoses for leak tightness and replace the respective components if necessary).
General
