horsch Tiger 3 MT - Page 2

EC Declaration of Conformity
exchangeable equipment
(RL 2006/42/EC)
The manufacturer HORSCH Maschinen GmbH
Sitzenhof 1
D-92421 Schwandorf
hereby declares, that the product,
Designation of machine: Cultivation tool
Machine type:
from serial no.: 34731531 Tiger 3 AS
from serial no.: 34741612 Tiger 4 AS / rigid
from serial no.: 34751375 Tiger 5 AS
from serial no.: 34761346 Tiger 6 AS
from serial no.: 34781323 Tiger 8 AS
this declaration refers to, conforms with all relevant fundamental health and safety requirements
of the EC directive 2006/42/EC.
For proper implementation of the heath and safety requirements mentioned in the EC-directive,
the following standards and technical speci󰘰cations have been used:
- EN 894-4 : 02-2010
- EN 1853 : 02-2010
- EN ISO 4413 : 04-2011
- EN ISO 4414 : 04-2011
- EN ISO 4254-1 : 05-2011
- EN 14018 : 02-2010
Schwandorf, 27.09.2013 Manfred Köbler
Place and date Documentation Representative
HORSCH Maschinen GmbH
Sitzenhof 1
D- 92421 Schwandorf
Tel: (09431) 7143-0
____________________ ____________________
M. Horsch P. Horsch
(CEO) (Development and Engineering)