Horstmann Controls Limited South Bristol Business Park Roman Farm Road Bristol BS4 1UP
Tel 0117 978 8700 Fax 0117 978 8701 E-mail sales@horstmann.co.uk www.horstmann.co.uk
BS 5750
Part 1
ISO 9001
Q5646
Horstmann.
We’re in control.
SPECIFICATION
CYLINDER THERMOSTAT
TYPE HCT 2
OPERATING VOLTAGE
220/240V 50/60Hz
SWITCH CURRENT AT 250V AC
16 Amps Maximum
CONTACT CONFIGURATION
SPDT
TEMPERATURE RANGE
0°C - 90°C
SWITCHING DIFFERENTIAL
Approx. 3°C
SENSOR SYSTEM
Bimetallic
ENCLOSURE PROTECTION
IP 40
ROOM THERMOSTAT
TYPE HRT 2
CONTACT CONFIGURATION
SPST
TEMPERATURE RANGE
5°C - 35°C
SWITCHING CURRENT AT 250V AC
10 Amps maximum
SWITCHING DIFFERENTIAL
Approx. 0.5°C
SENSOR SYSTEM
Bimetallic
ENCLOSURE PROTECTION
IP 30
CYLINDER THERMOSTAT
Model HCT 2
With an adjustable temperature range of
between 0°C - 90°C, the Horstmann cylinder
thermostat is suitable for mounting on either
domestic hot water cylinders or large heating
pipes.
A bimetallic sensor system ensures precise hot
water temperature control. Each unit is supplied
with a strap and buckle, for easy installation.
ROOM THERMOSTAT
Model HRT 2
Good looking and reliable, the Horstmann room
thermostat is suitable for all central heating
systems which respond to an electrical on/off
signal.
A bimetallic sensor ensures excellent response
to temperature changes and a simple rotating
dial allows setting between 5°C - 35°C.
Units can be mounted directly onto the wall
using the built-in patress.
Both the Horstmann room thermostat and
cylinder thermostat are fully compatible with
Horstmann's motorised valves and central
heating programmers.
To Previous Page
Loading...
Need help?
General
