Horton Easy Access 7100 Series User Manual

G710, JAN 2001
7.069d3
To be used in conjunction with H-SW C4190 Setup Instructions
Series 7100 Easy Access
Surface Applied Swing Door Operator
for C4190 Control
Installation Instructions
™

Horton Easy Access 7100 Series Specifications

General

Brand	Horton
Model	Easy Access 7100 Series
Category	Garage Door Opener
Language	English

Summary

Instructions to the Installer

Information to be Provided by the Distributor to the Owner

General Requirements

Handicap Code Requirements

Operator Handing

Installation - Surface Applied Series 7100

Additional Mounting Conditions

Details alternative mounting configurations for the operator unit.

Mount Operator in Header

Step-by-step guide for mounting the operator unit within the header.

Installing Adjustable Connecting Arm

Standard Arm Connections

Outlines standard methods for connecting the operator arm.

Setting the Open Stop and Loading Operator Spring

Installing Parallel Arm & Track

Changing Hand

Instructions for altering the operator's hand configuration.

Installing Actuation Switches

C1316-2 Switch Assembly

Details for installing the C1316-2 surface-applied switch assembly.

C1260 Switch Assembly

Details for installing the C1260 switch assembly.

Operator Adjustments

Changing Operator Hand and/or Closing Spring

If Spring Was Broken

Procedure for replacing a broken operator spring.

If Changing Spring Direction From LH to LHR or RH to RHR (Inswing to Outswing)

Steps for changing spring direction (inswing to outswing).

If Changing Both Spring Direction & Operator Hand (From LHR to RHR or RHR to LHR)

Steps for changing both spring direction and operator hand.

Placement of Safety Decals

S7900 Fire Door Operator