Take out the battery, plug the charger into the charging interface, then
plug into the socket and press the battery start button. Then the power
indicator will light up and display the real-time power.
Vehicle Charging Mode
Put the battery into the battery compartment, connect the vehicle
power plug to the battery, and then insert the charger charging plug
into the charging interface above the footboard to charge the
motorcycle. Then the charger indicator will light up and the battery
will display the real-time power.
Charging interface
Description of battery power indicator
In the charging state, the indicator light shows the battery power.
After the battery is fully charged, all indicator lights are normally on
and will no longer flash.
To Next Page
Loading...