Motor (* *)
Inspection operation
Check the cable for
cracks or damage
(*) Unless you have the appropriate tools, service data and mechanical
qualifications, otherwise, the vehicle shall be inspected by your HORWIN
authorized dealer. (* *) For safety reasons, we recommend that these items can
only be provided by your authorized HORWIN dealer.
Troubleshooting
Troubleshooting of the Whole Vehicle
Turn on the
power switch
and the vehicle
has no power
output
The vehicle is not
powered
Treatment Method
1 Check whether the connectors of the
battery are plugged on the vehicle
properly
2 The battery is under undervoltage
condition, please charge the battery
Turn on the
power switch,
rotate the speed
regulating
handle, the
motor
is not started
1. The vehicle is in a
braking state
2. The vehicle is in a
parking state
3. The side stand is not
retracted
4. The start switch has
failure
5. The braking handle is
not reset
1.Check whether the vehicle is in a
braking state
2.Retract the side stand
3. Contact the after sales service
personnel and check the automatic
switch
To Next Page
Loading...