Hoshizaki IM-45 User Manual

NO. E1AP-433
ISSUED: APR. 30, 1997
REVISED: JUL. 29, 2005
HOSHIZAKI
SELF-CONTAINED CUBER
MODEL IM-21 IM-100
IM-25 IM-130
IM-30 IM-160
IM-45 IM-240
IM-65
SERVICE MANUAL
Kälte-Berlin
Inh.: Christian Berg
Am Pfarracker 41
12209 Berlin
Fon: +49 (0) 30 / 74 10 40 22
Fax: +49 (0) 30 / 74 10 40 21
eMail: info@kaelte-berlin.de
Internet: http://www.kaelte-berlin.com
Direktlink Hoshizaki Zylindereisbereiter IM130ME-C zu Kälte-Berlin

Hoshizaki IM-45 Specifications

General

Brand	Hoshizaki
Model	IM-45
Category	Ice Maker
Language	English

Summary

II. GENERAL INFORMATION

1. CONSTRUCTION

2. CONTROLLER BOARD

Details about the icemaker's controller board, including layout and troubleshooting.

III. INSTALLATION INSTRUCTIONS

2. LOCATION

3. INSTALLATION

General instructions and warnings for the installation process.

4. ELECTRICAL CONNECTIONS

Information on proper electrical hookups, including safety warnings.

5. WATER SUPPLY AND DRAIN CONNECTIONS

Instructions for connecting water supply and drain lines, with diagrams.

6. FINAL CHECK LIST

A checklist to ensure all installation steps are completed correctly.

IV. OPERATING INSTRUCTIONS

1. START UP

Step-by-step guide to starting the icemaker for the first time.

V. MAINTENANCE INSTRUCTIONS

1. PERIODICAL CLEANING

Guidance on regular cleaning of the icemaker's exterior and interior components.

4. ICEMAKING WATER SYSTEM

VII. SERVICE DIAGNOSIS

1. NO ICE PRODUCTION

Troubleshooting guide for when the icemaker fails to produce ice.

2. LOW ICE PRODUCTION

Diagnosing and resolving issues causing reduced ice production.

3. ABNORMAL ICE

Identifying causes and remedies for abnormal ice formation.

IX. REMOVAL AND REPLACEMENT

1. SERVICE FOR REFRIGERANT LINES

2. COMPRESSOR

Step-by-step guide for removing and replacing the compressor.

3. DRIER

4. EXPANSION VALVE

5. EVAPORATOR

6. HOT GAS VALVE

9. PUMP MOTOR

14. CONTROLLER BOARD

Steps for replacing the controller board.

17. FAN MOTOR - AIR-COOLED MODEL ONLY